🎯 Complete Tutorial: Wiring and Setting Up the Dena Electric Smart Curtain Module + Connecting to the App
If you’re planning to smarten up your home or office and want an affordable, high-quality, Iranian-made solution, the Dena Electric Smart Curtain Control Module is one of your best options.
In this step-by-step guide, we’ll teach you how to install, wire, and connect your Dena Smart Curtain Module to the Smart Life app for seamless remote control.
🔌 Step-by-Step Wiring Guide for the Dena Electric Smart Curtain Module
Smart home setup is an exciting and future-focused experience — and if you want to control your curtains remotely or via app, the Dena Smart Curtain Module is a perfect choice.
But before anything else, correct and safe wiring is the most important step. Below is a complete, practical guide to connecting your module to power and getting it ready for use.
✅ Step 1: Preparing the Module
After unboxing, hold the module so that the screw terminals are at the top — this position makes wiring easier and clearer.
On the back of the module, you’ll find four connection ports (terminals) labeled as follows:
N (Neutral): Connect the neutral wire here — usually blue in color.
L (Live): Connect the main live wire — usually brown or black. This powers the module.
L1: Output for opening the curtain (sends power to the motor when you tap “open” in the app or on the switch).
L3: Output for closing the curtain (sends power for the closing action).
⚠️ Essential Safety Tips Before Installation
Turn off the main power from your breaker box — working with live wires is dangerous.
Use insulated, standard electrical tools (screwdriver, tester, wire cutter, etc.).
If you’re not experienced with wiring, consult a professional electrician.
💡 Pro Tip: Label your wires before installation — for example, mark them as N, L, L1, and L3. It makes wiring error-free and faster.
🔧 Installation Notes
Despite its technical appearance, the wiring for the Dena Smart Curtain Module is quite simple.
Once the connections (N, L, L1, L3) are properly made, the module is ready for software setup.
🎨 Design Flexibility
A great feature of Dena Electric’s smart curtain module is its customizable design — it fits a variety of faceplates such as Avin, Raya, and Rata, and comes in elegant colors like white, black, beige, and gray to match your interior décor.
In the next section, we’ll walk you through connecting the module to the Smart Life app and how to control your curtains intelligently from anywhere in the world. 🌍
| مرحله | عنوان | توضیحات | نکات مهم |
|---|---|---|---|
| 1️⃣ | آمادهسازی ماژول | بررسی ترمینالها: N, L, L1, L3 | ماژول را طوری در دست بگیرید که پیچها در بالا قرار داشته باشند |
| 2️⃣ | سیمکشی اصولی | اتصال نول به N، فاز به L، خروجیها به L1 و L3 | حتماً برق را از فیوز قطع کنید، از ابزار عایقدار استفاده شود |
| 3️⃣ | فعالسازی Pairing Mode | نگه داشتن یکی از کلیدهای ماژول به مدت ۵ ثانیه | چراغ LED باید شروع به چشمک زدن کند |
| 4️⃣ | نصب Tuya Smart یا Smart Life | نصب اپلیکیشن از Google Play یا App Store | حتماً گوشی به وایفای 2.4GHz متصل باشد |
| 5️⃣ | افزودن ماژول در نرمافزار | استفاده از دکمه + و گزینه Add Device | ماژول بهصورت خودکار شناسایی میشود |
| 6️⃣ | اتصال به وایفای | انتخاب مودم و وارد کردن رمز عبور | ترجیحاً از مودمهایی با فرکانس 2.4GHz استفاده شود |
| 7️⃣ | اتصال موفق و تثبیت نشانگرها | چراغ LED ماژول ثابت میشود | نشانهی اتصال موفق بین ماژول و نرمافزار است |
| 8️⃣ | شخصیسازی دستگاه در نرمافزار | تغییر نام دستگاه و استفاده از عناوین فارسی | نامگذاری واضح به مدیریت بهتر کمک میکند |
| 9️⃣ | کنترل عملکرد پردهها | باز و بسته کردن پرده از طریق اپلیکیشن یا دکمه | میتوان درصد باز شدن را نیز تنظیم کرد |
| 🔟 | تنظیمات پیشرفته | امکان زمانبندی، سناریوهای هوشمند، توقف پرده | قابلیتهای حرفهای برای تجربه کاربری بهتر |
🪟 How to Connect the Dena Electric Smart Curtain Module to the Smart Life App
In this guide, you’ll learn how to connect your Dena Electric Smart Curtain Module to the Smart Life app for complete remote control of your curtains. Follow the steps below 👇
✅ Step 1: Prepare the Module for Pairing
Press and hold one of the three touch buttons on the module for about 5 seconds.
When the LED indicators start blinking, the module enters Pairing Mode (connection setup).
✅ Step 2: Open the Smart Life App
Launch the Smart Life app on your phone.
Tap the “+” icon at the top of the screen.
Select Add Device.
✅ Step 3: Select the Device and Connect to Wi-Fi
After a few seconds, the Dena Electric Curtain Module will appear in the device list — tap to select it.
Enter your Wi-Fi name and password.
(Optional) You can change your Wi-Fi network by selecting Change Network.
Tap Next and wait a few moments.
Once the LED indicator becomes steady, the connection has been successfully established 🎉
⚙️ App Features After Connection
After a successful setup, you’ll have access to the following features in the control panel:
Open or close your curtains with a single tap
Pause movement of the curtain at any point
Adjust the opening percentage (e.g., open 40%)
Rename the module (e.g., “Living Room Curtain”)
Access advanced settings from the bottom menu
🌟 Why Choose the Dena Electric Smart Curtain Module?
🇮🇷 Made in Iran with high quality and reliable after-sales service
🔗 Compatible with the Smart Life international app
⚡ Easy installation — perfect even for beginners
🌐 Supports IoT-based smart home systems
🪟 Compatibility
The Dena Electric smart module is compatible with various types of electric curtains, including:
Zebra blinds
Double-layer curtains
Pleated blinds
You can easily automate and control them remotely via your smartphone — anytime, anywhere.
💬 If you have any questions about installation or setup, feel free to ask in the comments or contact Dena Electric support for assistance.
📲 How to Connect the Dena Electric Smart Curtain Module to the Tuya Smart (Dena Smart) App
Connecting your Dena Electric Smart Curtain Module to the Tuya Smart (or Smart Life) app is one of the key steps in automating your curtain system at home or the office.
In this step-by-step guide, you’ll learn exactly how to connect your module and start smart control in just a few minutes.
✅ Step 1: Open the Tuya Smart App
To begin:
Open the Tuya Smart app (or Smart Life) on your smartphone.
Make sure your Wi-Fi or mobile internet is turned on and that your phone is connected to the same network the module will use.
✅ Step 2: Activate Pairing Mode on the Module
To prepare the module for connection:
Press and hold any of the touch buttons on the module for about 5 seconds.
The LED indicators will start blinking — this means the module has entered Pairing Mode and is ready to connect.
✅ Step 3: Add the Device in the App
In the Tuya Smart app, tap the “+” icon at the top right of the main screen.
Select “Add Device.”
The app will automatically detect the Dena Smart Curtain Module.
Tap the detected device name to continue.
✅ Step 4: Connect the Module to Wi-Fi
Choose your Wi-Fi network when prompted.
By default, the app suggests the network your phone is currently connected to.
To use a different Wi-Fi network, tap the network icon and select another available option.
Enter your Wi-Fi password and tap Next.
💡 Tip: Use a 2.4GHz Wi-Fi network, as most smart modules are not compatible with 5GHz bands.
✅ Step 5: Wait for the Connection
Wait a few moments while the app connects to the module.
When the LED lights stop blinking and remain steady, the pairing is successful.
✅ Step 6: Customize the Device Name
After a successful connection:
You can rename the module to something more descriptive, such as “Living Room Curtain” or “Bedroom Curtain.”
Tap the pencil icon next to the device name, enter your new name, and press Done.
✅ Final Step: Control and Adjust Curtain Settings
Once connected, you’ll have full access to the control panel with features such as:
Instantly open or close the curtains
Pause the curtain movement anytime via the app or the physical touch switch
Real-time synchronization between the app and module
Advanced settings including speed adjustment, open percentage limits, and scheduling
🧭 Example:
When you tap “Close Curtain” in the app, the motor activates, and the curtain starts closing.
If you use the physical switch instead, the app will instantly display the updated status.
💡 Pro Tips for the Best Experience
Ensure both your phone and module are on the same Wi-Fi network.
Double-check your Wi-Fi password and signal stability.
Prefer a 2.4GHz network for optimal performance.
If pairing fails, reset the module and repeat the steps.
With these simple steps, you can easily integrate your Dena Smart Curtain Module with Tuya Smart, turning your home into a more comfortable, efficient, and intelligent space.